How to remove cpu cooler

An essential component of any computer is a cooling fan that helps dissipate heat generated by its powerful processor. As a result, it is often necessary to remove the cooling fan to clean or inspect the cooler.

As a result, how can you remove your CPU cooler in this situation To begin, unplug the computer and remove the cooler cover once it has been turned off. The next step is to warm up the thermal paste, and then remove it from the motherboard. Finally, all you have to do is remove the processor’s heatsink from the cooler. …and that’s it!

It may appear to be an easy activity to those who have done it many times before, but for newcomers, it can be a challenge. “Hold on!” Because we’ll show you how to remove a CPU cooler, what happens afterward, and when you should do it next.

First things first, let’s acknowledge each other!

CPU cooler removal is a complex process.

CPU cooler removal is really straightforward. The techniques outlined below will help you remove the cooler with minimal damage to the other parts of your system.

 

  • Turn off the computer: Make sure your computer is turned off before you begin any process. If you don’t, you’ll receive a shock. It’s possible that your computer will act strangely, and there’s a chance that components will burn.

Reminder: When the CPU is running, you cannot remove a cooler. Disconnecting it from the motherboard is also necessary.

  • Remove cooler cover: A duct or ventilation system may be installed on some of the CPUs. In order to see the processor and heatsink, you’ll have to take it off. By pressing the clamps and yanking the duct away, you may swiftly remove it.

Tips: If you don’t complete the work correctly, you could injure yourself. It’s also possible to break the lid if you’re in a hurry.

  • Heating the thermal paste: A thermal paste is a substance that connects the processor cooler to the motherboard. The cooler fan and CPU will remain welded together if the thermal paste is cold. Running your computer for 15 to 20 minutes is the secret to accomplishing this. When the paste is heated, it will become soft and flexible, making it easier to remove the cooler. Read on to learn more about removing thermal paste!

Tips: Do not skip this step, as it could result in bent pins that will void the warranty on the cooler. Also, keep your hands away from the warm thermal paste to avoid burning yourself. 

  • Disengage the cooler: Before removing the cooler, you must disconnect it from the motherboard. A two, three, or four-pin cable linked to the motherboard should be easy to locate. The cooler must be disengaged by removing the pins. If you know how to open these pins, it’s not too difficult. If a pin gets stuck, don’t try to remove it with brute force. Don’t pull the pin by its wire, though, as this could destroy the pin’s electrical connection. You can pull the end of the cable away from the motherboard by grabbing it.
  • Unclip from the processor: The cooler is connected to the processor via multiple clips attached to the motherboard. When the cooler is disconnected, look for the clamps that keep the processor in place.

If you carefully press them down, you may easily remove the clips. Screws are sometimes used to attach coolers. Remove the cooler by unscrewing the screws that hold it in place. The cooler and the processor will be damaged if you try to force it.

In other words, this is how you take your computer’s CPU cooling out. Depending on the model, the process may be slightly different. In this section, we’ll go over how to remove an Intel CPU cooler if you have one.

Installing a new heatsink

To remove an Intel CPU cooler from the motherboard, four push pins must be pressed and turned anti-clockwise. The cooling connector on the motherboard should always be disconnected first.

It’s important to keep in mind that these intel four pins are a little different from the rest of them. As a result, the procedure outlined above may not be as effective with Intel CPU coolers as we had hoped. To remove it from the motherboard, you must press the pins and rotate it anti-clockwise.

It’s possible to remove it by hand, however a screwdriver can be inserted to make it go faster. When all four pins have been removed, you should be able to easily lift the cooler’s fan by holding the side of the cooler in one hand.

It’s possible that one or two of the cooler’s pins are still attached to the motherboard if it doesn’t come out easily. Don’t try to lift yourself out of it with brute effort. Both your motherboard and cooler will be damaged if you remove it too forcefully.

Thermal paste holds the processor and cooling unit together. Before reattaching it, you’ll need to thoroughly clean it and apply a fresh coat of paste.

Cooler master CPU fan removal: what are the steps?

CPU coolers come in all shapes and sizes, as can be seen in this example. That’s why we had to tell you about this one’s method, too. The cooler master CPU units are larger and heavier than conventional cooling devices.. It’s screwed in place atop your processor with four Phillips head screws.

Three clips join the cooler master CPU fan to the thermal cooling unit. It’s easy to remove the fan and big heat sink by simply unclipping the clips with a screwdriver. Isn’t that the case?

To remove the entire unit, you’ll need a screwdriver to undo the four screws holding it in place. This is a difficult task that necessitates extreme caution.

Thermal paste is used to attach this entire heat sink assembly to the processor. As we indicated earlier, you must warm the thermal paste before you begin the removal process.

What will happen if the CPU cooler is taken out?

Thermal paste keeps the CPU cooler sealed to the processor. Once the seal has been broken, you will not be able to put it back with the rest of the paste. This will cause the paste to bubble up, preventing the cooler from attaching correctly to the processor.

After cleaning up, you must reattach a new CPU cooler or the old one if you want to keep your computer running. If the bubble persists in the paste, your cooler won’t be able to adequately cool your processor, resulting in sluggish performance from your computer.

So, if you remove your CPU cooler, be careful to wipe off any old paste and then apply some new thermal paste to seal the new or existing cooler correctly because the cooler is crucial for cooling down the components and your computer won’t work without it.

The CPU cooler should be removed at what point in time?

The cooler fan accumulates a lot of dust over time, causing the heat sink unit to not function to its full potential. It must be removed, dusted, and then reinstalled correctly. This will allow the processor to run more efficiently without overheating.

Assuming your old cooler isn’t functioning properly, you’ll need to replace it right away. If your computer’s cooling system fails, you’ll experience problems such as a constantly restarting computer and an overheating CPU.

Again, the old thermal paste often turns oily and filthy over the course of time. In these situations, a new paste is required to correctly attach the existing cooler. To reapply the thermal paste, you will need to remove the CPU cooler from the case.

To sum it up,

As a result, a CPU cooler can be considered an extremely important and powerful component of a CPU. As a result, the quantity of heat generated by a strong processor can be lessened.

Even though removing and reattaching the cooler unit is a difficult operation, following our instructions on how to remove the CPU cooler will make it much easier for you.

Because thermal paste is essential for keeping the computer connected to the processor, you should understand how to correctly unplug your cooler and reinstall it with the fresh thermal paste.

Like the processor, the cooler is a vulnerable component. So, if you’re handling something on your own, go cautiously. All the best to you in your endeavors!

 

Leave a Reply

Your email address will not be published.